Duran Ventures Inc. (TSX VENTURE:DRV)(BVL:DRV) ("Duran" or the "Company") is
pleased to report an updated resource estimate for its 100% owned porphyry
copper/molybdenum Aguila Project, Peru. The Aguila Project is located in Peru's
north central Ancash District, 40 kilometres south of the Magistral
copper/molybdenum deposit of Compania Minera Milpo SAA ("MILPO") and some 120 km
north of Peru's largest polymetallic mine, the Antamina Mine held by
BHP/Xstrata/Teck/Mitsubishi.
The Company included data from its 2012 trenching and 2013 drilling programs for
the purpose of this update. Table 1 presents the updated Total Resource Estimate
as prepared by James A. McCrea, P.Geo. The Initial Resource Estimate from March
8, 2012 is presented in Table 2.
Table 1
Mineral Resource Statement(i) for Duran Ventures Inc., Aguila Project, Peru,
James A. McCrea, P.Geo., June 7, 2013
---------------------------------------------------------------------------
Quantity Contained Metal
000' Grade (%) (Million lb)
Category tonnes Cu Mo CuEq Cu Mo
---------------------------------------------------------------------------
Open Pit Resources
Indicated 112,335 0.40 0.031 0.49 987.59 76.59
Inferred 82,350 0.31 0.022 0.36 561.40 40.51
---------------------------------------------------------------------------
Underground Resources
Indicated 7,068 0.32 0.020 0.37 50.39 3.13
Inferred 41,529 0.37 0.028 0.45 337.58 25.87
---------------------------------------------------------------------------
Total Resources
Indicated 119,403 0.40 0.030 0.48 1037.98 79.72
Inferred 123,879 0.33 0.024 0.39 898.98 66.38
---------------------------------------------------------------------------
(i) Mineral resources are not mineral reserves and do not have demonstrated
economic viability. All figures have been rounded to reflect the relative
accuracy of the estimates. Open pit mineral resources are reported at a
copper cut-off grade of 0.22 percent copper equivalent and underground
mineral resources are reported at a cut-off grade of 0.26 percent copper
equivalent. Copper equivalent grades are based on the G&T Metallurgical
Services Ltd. determined metallurgical recoveries of 93 percent copper and
91 percent for molybdenum in the intrusive rocks and 83 per cent copper and
82 per cent molybdenum in the sedimentary rocks. Metal price assumptions of
US$2.85 per pound of copper and US$13.85 per pound of molybdenum oxide have
been used. CuEq is calculated using elemental molybdenum analysis.
Table 2
Mineral Resource Statement(i) for Duran Ventures Inc., Aguila Project, Peru,
SRK Consulting (Canada) Inc., March 8, 2012
---------------------------------------------------------------------------
Quantity Contained Metal
000' Grade (%) (Million lb)
Category tonnes Cu Mo CuEq Cu Mo
---------------------------------------------------------------------------
Open Pit Resources
Indicated 27,750 0.61 0.04 0.79 374.5 22.0
Inferred 299,640 0.26 0.02 0.36 1,743.9 125.5
---------------------------------------------------------------------------
Underground Resources
Inferred 55,880 0.32 0.03 0.48 394.2 40.7
---------------------------------------------------------------------------
Total Resources
Indicated 27,750 0.61 0.04 0.79 374.5 22.0
Inferred 355,520 0.27 0.02 0.38 2,138.2 166.2
---------------------------------------------------------------------------
(i) Mineral resources are not mineral reserves and do not have demonstrated
economic viability. All figures have been rounded to reflect the relative
accuracy of the estimates. Open pit mineral resources are reported at a
copper cut-off grade of 0.22 percent copper equivalent and underground
mineral resources are reported at a cut-off grade of 0.26 percent for
copper equivalent. Copper equivalent grades are based on averaged
metallurgical recoveries of 87 percent copper and 88 percent for molybdenum
and metal price assumptions of US$2.85 per pound of copper and US$13.85 per
pound of molybdenum.
Company CEO and President, Jeff Reeder, is pleased to present this updated
resource estimate for the Aguila Project. Mr. Reeder states, "The initial
mineral resource estimate demonstrated the pervasive extent of the Aguila copper
and molybdenum mineralization drilled at the property. Subsequent 2012 trenching
and 2013 drilling programs have strategically in-filled the central core of the
intrusive mineralization at Aguila. We are pleased that our work over this past
year has converted a significant tonnage of the Aguila Resource to the Indicated
category, now containing 1 billion pounds of copper and 79 million pounds of
molybdenum." Mr. Reeder further states: "The Aguila project, along with the
Magistral (MILPO), the Raycacocha (Penoles) and the Mamanina (Duran) properties
are all occurring along a new copper porphyry trend in the north central Ancash
department. Aguila has considerable more upside exploration potential and we
feel confident for additional discoveries."
Aguila Project Summary
The Aguila deposit is a porphyry copper-molybdenum deposit hosted in
hydrothermally altered diorite, quartz diorite, and monzonite porphyry rocks
that have intruded sedimentary rocks of the Chicama and Chimu Formations. Copper
and molybdenum mineralization consists of disseminated and stockwork style
chalcopyrite and molybdenite in the intrusive and sedimentary rocks. Alteration
over the deposit consists of mainly potassic alteration with an intermediate
argillic retrograde overprint. The sedimentary rocks show strong silicificaton
with abundant quartz/chalcopyrite/pyrite and molybdenite stockworks. Supergene
mineralization is not associated with this deposit because of high relief and
fast erosion rates. Recent work at the Aguila project has focused on assessing
the presence of a higher grade zone of copper/molybdenum mineralization in the
intrusive rocks that forms the core of the deposit. As drilled to date, the
deposit extends for approximately 1,000 metres from east to west, 700 metres
north to south and vertically for 1,000 metres. Conceptual pits have been
optimized using Lerchs-Grossman techniques. The total resource as estimated has
been determined primarily in an ultimate pit shell that extends from an
elevation of 4200 meters to its bottom at 3400 meters. Resources determined
outside the pit shell have been reported as "Underground Resources". Table 3
represents the sensitivity of the block model estimates to the selection of
cut-off grade and a schematic presentation of the "In Pit" resource is presented
in Figure 1. Drilling has established that the mineralization extends
continuously through much of the surrounding host sedimentary rocks. See Figures
2, 3 and 4 that show plan and drill sections through the resource block model
(UTM Grids and vertical levels are provided for metric scale).
Table 3
Indicated and Inferred Block Model Quantities and Grade Estimates within
the Pit Shell(i), Aguila Project.
---------------------------------------------------------------------------
Indicated Inferred
------------- ------------------------------ ------------------------------
Quantity Quantity
Cut-off Grade 000' Cu Mo CuEq MoO3% 000' Cu Mo CuEq MoO3%
CuEQ% tonnes % % % (ii) tonnes % % % (ii)
---------------------------------------------------------------------------
0.15 126,950 0.37 0.029 0.45 0.044 115,850 0.27 0.019 0.31 0.029
---------------------------------------------------------------------------
0.20 118,827 0.39 0.031 0.49 0.046 95,377 0.29 0.021 0.34 0.031
---------------------------------------------------------------------------
0.22 112,335 0.40 0.031 0.49 0.046 82,350 0.31 0.022 0.36 0.033
---------------------------------------------------------------------------
0.25 100,592 0.42 0.032 0.52 0.049 64,105 0.34 0.025 0.40 0.037
---------------------------------------------------------------------------
0.26 96,444 0.43 0.033 0.53 0.049 58,782 0.35 0.025 0.41 0.038
---------------------------------------------------------------------------
0.30 80,519 0.48 0.034 0.58 0.051 41,166 0.40 0.028 0.47 0.041
---------------------------------------------------------------------------
0.35 65,482 0.53 0.035 0.64 0.053 26,225 0.47 0.031 0.55 0.046
---------------------------------------------------------------------------
0.40 56,303 0.57 0.035 0.68 0.053 17,972 0.53 0.033 0.63 0.050
---------------------------------------------------------------------------
0.45 50,775 0.60 0.036 0.71 0.053 13,657 0.58 0.035 0.69 0.053
---------------------------------------------------------------------------
0.50 46,239 0.62 0.036 0.73 0.054 11,766 0.61 0.036 0.73 0.055
---------------------------------------------------------------------------
(i) The reader is cautioned that the figures in this table should not be
misconstrued as a Mineral Resource Statement. The figures are only
presented to show the sensitivity of the block model estimates to the
selection of cut-off grade.
(ii) The resource model includes elemental molybdenum assay data. Industry
prices are for MoO3 (molybdenum oxide). A conversion factor of 1.5 was used
to correct the elemental molybdenum assay grade (%) to MoO3 as commercially
priced.
CuEq is calculated using elemental molybdenum analysis.
Figure 1 can be viewed at the following link:
http://www.duranventuresinc.com/maps/Figure1-SchematicView_Aguila_Pit_StarterPit_Shell_Res.jpg
MineSight software modeling techniques have been used to determine a higher
grade, nearer surface, contiguous body of copper and molybdenum mineralization
that is hosted principally in intrusive rocks. Figure 1 above illustrates this
higher grade core of mineralization and Lerchs-Grossman optimization has
developed a conceptual pit shell that extends from 4200 meters to 3600 meters.
This conceptual pit shell has been estimated to contain an Indicated Resource of
71.1 million tonnes at an average CuEq grade of 0.52% plus an Inferred Resource
of 26.3 million tonnes at an average CuEq grade of 0.33%. See Table 4 for the
sensitivity of the block model estimates to the selection of cut-off grade for
the optimized, higher grade resource estimate that is contained in this
conceptual pit shell. Such a contiguous body will be the focus of a preliminary
economic study for a potential "Starter Pit". Figures 2, 3 and 4 also show this
higher grade resource block model in plan and section.
Table 4
Indicated and Inferred Block Model Quantities and Grade Estimates for the
High Grade Core within the Pit Shell(i), Aguila Project.
---------------------------------------------------------------------------
Indicated Inferred
------------- ------------------------------ ------------------------------
Quantity Quantity
Cut-off Grade 000' Cu Mo CuEq MoO3% 000' Cu Mo CuEq MoO3%
CuEQ% tonnes % % % (ii) tonnes % % % (ii)
---------------------------------------------------------------------------
0.15 76,776 0.40 0.031 0.49 0.046 32,218 0.25 0.022 0.30 0.033
---------------------------------------------------------------------------
0.20 73,814 0.41 0.031 0.50 0.047 28,998 0.27 0.022 0.32 0.034
---------------------------------------------------------------------------
0.22 71,107 0.42 0.032 0.52 0.048 26,259 0.28 0.023 0.33 0.035
---------------------------------------------------------------------------
0.25 65,631 0.44 0.033 0.54 0.049 21,174 0.30 0.024 0.35 0.037
---------------------------------------------------------------------------
0.26 63,536 0.45 0.033 0.55 0.050 19,546 0.30 0.025 0.36 0.037
---------------------------------------------------------------------------
0.30 54,543 0.49 0.034 0.59 0.051 13,504 0.34 0.025 0.39 0.038
---------------------------------------------------------------------------
0.35 45,476 0.54 0.035 0.65 0.052 7,875 0.39 0.025 0.44 0.038
---------------------------------------------------------------------------
0.40 39,971 0.58 0.035 0.69 0.052 4,405 0.44 0.026 0.49 0.038
---------------------------------------------------------------------------
0.45 36,466 0.60 0.035 0.71 0.052 2,297 0.49 0.026 0.55 0.039
---------------------------------------------------------------------------
0.50 33,364 0.62 0.035 0.73 0.053 1,211 0.55 0.027 0.62 0.040
---------------------------------------------------------------------------
(i) The reader is cautioned that the figures in this table should not be
misconstrued as a Mineral Resource Statement. The figures are only
presented to show the sensitivity of the block model estimates to the
selection of cut-off grade.
(ii) The resource model includes elemental molybdenum assay data. Industry
prices are for MoO3 (molybdenum oxide). A conversion factor of 1.5 was used
to correct the elemental molybdenum assay grade (%) to MoO3 as commercially
priced.
CuEq is calculated using elemental molybdenum analysis.
Figures 2, 3, and 4 can be viewed at the links that follow:
Figures 2 and 3:
http://www.duranventuresinc.com/maps/Figures2-and-3_Section_10000N_CuEq_and_ResClass_Pit_StarterPit_Shells.jpg
Figure 4:
http://www.duranventuresinc.com/maps/Figure4-Plan_View_3800mElvn_ResClass_Pit_StarterPit_Shells.jpg
Duran President and CEO, Jeffrey Reeder, states, "We are very excited by the
presence of a 71.1 million tonne core of Indicated Resources, representing
higher grade mineralization, primarily in the intrusive rocks that averages
0.52% copper equivalent. Our preliminary metallurgical study demonstrated 93%
copper and 91% molybdenum recoveries respectively, in these intrusive rocks."
Positive preliminary metallurgical results determined by G&T Metallurgical
Services Ltd. (G&T) (See News Release Jan. 9, 2012) confirmed that the
copper/molybdenum mineralization is amenable to standard flotation processing
with good recoveries and no deleterious elements.
Resource Estimation Methodology - James A. McCrea, P.Geo.
The Aguila Project mineral resource estimate was prepared by James A. McCrea,
P.Geo. Mr. McCrea has over 25 years of experience as a geologist and almost 20
years doing resource estimates.
The database used to evaluate mineral resources for the Aguila deposit contains
51 diamond drill holes (24,720 metres) and 21 lines of surface channel samples
(3,155.63 metres). All drilling and sampling programs were undertaken by Duran
between 2007 and 2013 with the exception of five diamond drill holes completed
by Rio Tinto between 1998 and 1999. All diamond drill holes were completed using
HQ and NQ (or thin wall) drilling tools. Drill hole collars were surveyed with
differential GPS. Duran submitted approximately 278 core samples for specific
gravity measurements to the ALS Chemex laboratory in Lima, Peru. The specific
gravity measurements and lithologies logged for each interval were reviewed and
it was noted that there was little difference in specific gravity with respect
to lithology so an average specific gravity value of 2.78 was assigned globally
to all rock types. The specific gravity value is used to convert block volumes
into tonnage.
The Aguila deposit is composed of three major lithological units; two intrusive
stocks intruding a mixed sedimentary unit (shales to quartzite). Lithological
boundaries for the main two intrusive units were interpreted and modelled as
wireframe solids by Duran and verified by the author (a grade shell using a 0.1%
copper cut-off was built to constrain the sedimentary unit). The assay intervals
within the three lithologic units were analyzed using histograms and cumulative
probability plots to determine appropriate capping levels. Capping was
implemented to control the influence of high grade outliers. The capped assays
were composited to 3.0 metres for all lithologies.
Variograms were modelled for copper and molybdenum in each lithologic unit in
the Aguila deposit. A grade shell using a 0.1% copper cut-off was built to
constrain the estimate in the sedimentary unit and limit the influence of the
low grade halo around the deposit. A partial (percent) model was constructed for
each lithologic unit to give accurate volume to tonnage conversions. The block
size selected was 6 by 6 by 6 metres, which represents a reasonable pairing to
possible equipment size selections for the size of the pit, in the author's
opinion.
Resources were estimated using ordinary kriging (OK) for copper and molybdenum
using constrained estimates for the two intrusive units and for the sedimentary
unit. Separate variogram models were applied to all lithologies in the Aguila
deposit.
Copper equivalent grades were calculated for all estimated blocks. The copper
equivalent calculation was based on long term metal price assumptions of US$2.85
per pound of copper and US$13.85 per pound of molybdenum oxide (MoO3) and
metallurgical recoveries for intrusive rocks of 93% for copper and 91% for
molybdenum. Recoveries used for the sedimentary unit were 83% for copper and 82%
for molybdenum. The copper equivalent calculation used is a post recovery
equivalent.
Resource Classification
Mineral resources for the Aguila project have been classified according to CIM's
Definition Standards for Mineral Resources and Mineral Reserves (December 2005).
The mineral resources were classified into indicated and inferred mineral
resource categories based on drill hole spacing and variogram ranges. Indicated
mineral resource categorization was based on the first pass interpolation where
to classify a block as indicated there had to be a minimum of 2 drill holes
within 60 metres or less of the block. The indicated mineral resources must form
a contiguous minable unit in the deposit so a solid model was constructed based
upon a two hole minimum interpolation to outline blocks in the vicinity of these
parameters that form a contiguous unit. Blocks within this classification
wireframe solid were classified as Indicated as they represent block estimates
made with a good level of confidence. All other blocks inside of the geological
solid models or inside the 0.1% copper grade shell represent estimates with a
lower level of confidence and are, therefore, classified as Inferred. Blocks
outside the grade shell or geological solids, not in the grade shell, were not
interpolated or classified. Additional infill drilling and sampling is required
to support a higher classification. It cannot be assumed that all or any part of
an inferred mineral resource will be upgraded to an indicated or measured
mineral resource as a result of continued exploration.
Mineral Resource Statement
The Aguila deposit is amenable for open pit and underground extraction so to
assist with the interpretation of the mineral resource estimate, a conceptual
pit shell was developed using a Lerch-Grossman algorithm. The material outside
the resulting conceptual pit shell was considered as available for underground
mining. Material outside the conceptual pit shell was determined using a 0.26
CuEq% cut-off. The following assumptions were used to determine potential
economic cut-off grades for the deposit:
-- Metal price assumptions of US$2.85 per pound for copper and US$13.85 per
pound for molybdenum oxide;
-- Metallurgical recoveries used for molybdenum were 91% for intrusives and
82% for sediments;
-- Metallurgical recoveries used for copper were 93% for intrusives and 83%
for sediments;
-- Metallurgical, general and administration cost of US$4.25 per tonne of
feed;
-- Open pit slope of 50 degrees, mining cost of US$1.25 per tonne mined;
and sub level caving underground mining method with a mining cost of
approximately $US10.00 per tonne mined.
Based on these above assumptions, the author considers that classified resource
blocks above grades of 0.22 percent copper equivalent and 0.26 percent copper
equivalent show reasonable prospect for economic extraction for open pit and
underground mining, respectively. Mineral resources were estimated in conformity
with CIM's generally accepted Estimation of Mineral Resource and Mineral Reserve
Best Practices Guidelines. The mineral resources may be affected by further
infill and exploration drilling that may result in increases or decreases in
subsequent resource estimates. While the Company believes that no legal,
political, environmental or other risks exist that could materially affect the
potential development of the mineral resources of the Aguila Project, the
mineral resources may be affected by subsequent assessments of mining,
environmental, processing, permitting, taxation, socio-economic and other
factors in the future. The Mineral Resource Statement presented in Table 1 was
prepared by an independent Qualified Person as this term is defined in National
Instrument 43-101. The effective date of the mineral resource statement is May
29, 2013.
Quality Assurance / Quality Control Program
Diamond drill core was photographed and cut in half with a diamond saw, with one
half of the core delivered directly to the analytical laboratory and the other
half stored on site for future reference and assay verification. Channel samples
cut from the trenches were collected under the direct supervision of Duran
geological staff with samples being geologically logged before being bagged and
shipped. Assaying was carried out by ALS Chemex (Lima, Peru) a laboratory whose
quality control system complies with International Standards ISO 9001:2000 and
ISO 17025:2005. Samples were prepared using a four-acid digestion and atomic
absorption method for copper and molybdenum, as well as a multi-element ICP
analysis. The Company has a QA/QC protocol in place which includes the use of
certified standards, blanks, and duplicate samples, check assays carried out at
a second laboratory, as well as secure care and custody of samples.
Statistical analyses were performed on coarse duplicates for diamond drill core
and pulp duplicates for chemical laboratory analysis. Additionally, grade QA-QC
analyses were performed on standards and on blank samples. The conclusions drawn
from the QA-QC analyses are as follows:
-- Analyses of duplicates show good precision, indicating that the
protocols used for sample preparation and assaying were adequate.
-- Analyses of standards used during exploration show good accuracy.
-- Analyses of blanks show no serious contamination problems between
samples.
The overall conclusion is that QA-QC data generated throughout the Aguila
drilling and trenching program meets acceptability criteria and the exploration
data can be used with confidence for resource modeling and estimation.
The Author expects to file within the required period, a 43-101 technical report
to support the updated resource estimation for Duran's Aguila Project, Peru and
that makes the following recommendations;
Recommendations
-- Exploration drilling should continue over the Aguila south (deeper) and
Aguila East Expansion area and closing off mineralization to the west of
the Aguila area (3,000 metres);
-- Exploration drilling on the Pasacancha zone (2 km east) to target copper
and molybdenum mineralization down dip of the silver-zinc-lead
mineralization and geophysical IP targets (3,000 metres);
-- Exploration drilling targeting geophysical IP targets other than the
above (2,000 metres);
-- A Preliminary Economic Assessment of the "Starter Pit" should be
undertaken to evaluate the high grade core of copper/molybdenum resource
at Aguila
-- Commissioning environmental and socio-economic baseline studies for the
project.
Company Outlook
The updated resource estimation represents over a 430% tonnage increase in the
"Indicated Resource" with a corresponding increase in contained copper of 662
million lbs of copper and 52 million lbs of molybdenum at the Aguila project
from the initial resource estimate of 2012. Additional 2012 and 2013 exploration
drilling and trenching in the Aguila central core area and a reduction of "unit
block size" for modeling purposes (from earlier 12x12x12 meter blocks to 6x6x6
meter blocks for current estimate) contribute to the upgraded tonnage
classification. Geostatistical and geological review of the data provide
verification of the classification.
A corresponding 35% tonnage decrease in the "Inferred Resource" from the initial
resource estimate of 2012 can be attributed to the tonnage converted from
inferred to indicated classification and, additionally, the present estimate
used methodology that constrained the extrapolation of grades to a 0.1% copper
cut-off grade shell. This effectively limited the presence of peripheral lower
grade mineralization occurring in the host sedimentary rocks that had been
captured in the earlier estimate.
Duran believes that the 100% owned Aguila deposit now demonstrates a significant
enhancement of the copper/molybdenum resource. Mineralization at Aguila remains
open to the west of the Aguila pit shell, to the east, and at depth to the
southwest following the steeply plunging intrusive rocks. Additional porphyry
style copper/molybdenum mineralization is believed to underlie silver/lead/zinc
mineralization occurring 2 kms to the east at Pasacancha, and the Company has
several geophysical (Induced Polarization) anomalies that remain untested to the
south of the Aguila pit shell.
Company Information
Duran Ventures Inc. is a Canadian exploration company focused on the exploration
and development of porphyry copper and molybdenum, precious metal, and
polymetallic deposits in Peru. The Company's principal project is the Aguila
Copper/Molybdenum Project. Jeffrey Reeder, P.Geo., a qualified person as defined
in National Policy 43-101, is responsible for all technical information
contained in this news release other than the Aguila Project mineral resource
estimation as presented by James A. McCrea, P.Geo., a qualified person as
defined in National Policy 43-101.
Duran Ventures Inc. is a Canadian resource company listed on the TSX Venture
Exchange and the Bolsa de Valores de Lima: Symbol "DRV".
Disclosure Regarding Forward-Looking Statements: This press release contains
certain "Forward-Looking Statements" within the meaning of applicable securities
legislation. We use words such as "might", "will", "should", "anticipate",
"plan", "expect", "believe", "estimate", "forecast" and similar terminology to
identify forward looking statements and forward-looking information. Such
statements and information are based on assumptions, estimates, opinions and
analysis made by management in light of its experience, current conditions and
its expectations of future developments as well as other factors which it
believes to be reasonable and relevant. Forward-looking statements and
information involve known and unknown risks, uncertainties and other factors
that may cause our actual results to differ materially from those expressed or
implied in the forward-looking statements and information and accordingly,
readers should not place undue reliance on such statements and information.
Risks and uncertainties that may cause actual results to vary include but are
not limited to the speculative nature of mineral exploration and development,
including the uncertainty of resource estimates; operational and technical
difficulties; the availability to the Company of suitable financing
alternatives; fluctuations in copper and molybdenum and other commodity prices;
changes to and compliance with applicable laws and regulations, including
environmental laws and obtaining requisite permits; political, economic and
other risks arising from our Peruvian activities; fluctuations in foreign
exchange rates; as well as other risks and uncertainties which are more fully
described in our annual and quarterly Management's Discussion and Analysis and
in other filings made by us with Canadian securities regulatory authorities and
available at www.sedar.com. While the Company believes that the expectations
expressed by such forward-looking statements and forward-looking information and
the assumptions, estimates, opinions and analysis underlying such expectations
are reasonable, there can be no assurance that they will prove to be correct. In
evaluating forward-looking statements and information, readers should carefully
consider the various factors which could cause actual results or events to
differ materially from those expressed or implied in the forward looking
statements and forward-looking information.
FOR FURTHER INFORMATION PLEASE CONTACT:
Duran Ventures Inc.
Jeffrey Reeder
(416) 867-1591
info@duranventuresinc.com
www.duranventuresinc.com
Duran Ventures Inc. (TSXV:DRV)
Gráfico Histórico do Ativo
De Mai 2024 até Jun 2024
Duran Ventures Inc. (TSXV:DRV)
Gráfico Histórico do Ativo
De Jun 2023 até Jun 2024
