Skyworks Solutions, Inc. (NASDAQ:SWKS), an innovator of high
reliability analog and mixed signal semiconductors enabling a broad
range of end markets, today announced that it has introduced a
family of antenna switch modules (ASMs) for 2/3/4G handset and data
card platforms using both gallium arsenide (GaAs) as well as
silicon on insulator (SOI) technologies. Skyworks products address
the three primary switching functions: main antenna, diversity, and
band/mode.
These compact solutions deliver state-of-the-art technology to
meet both high performance and low-cost architectures, depending
upon the interface requirements. By delivering a comprehensive RF
switch portfolio based on both technologies, Skyworks is able to
augment its already broad portfolio of world-class switches
currently used in the company’s front-end modules.
“Skyworks is pleased to be supporting such a broad range of
next-generation wireless broadband and mobile handset applications
with our new family of antenna switch modules,” said Dr. Gene A.
Tkachenko, Skyworks’ senior director of engineering. “These
solutions highlight the breadth and depth of our technology as we
look to best serve our customers’ needs on multiple fronts and with
highly integrated architectures.”
About Skyworks’ 4G GaAs pHEMT and SOI Antenna Switch
Modules
- The SKY13362 is a single-pole
ten-throw (SP10T) ASM with an integrated complementary metal oxide
semiconductor (CMOS) decoder and dual low pass harmonic filters.
The small 3.0 x 3.8 mm switch has five 3/4G transmit-receive (TRx)
ports, three receive (Rx) ports, and two global system for mobile
communications (GSM) transmit signal low-pass harmonic filters that
make it the flexible choice for multiple combinations of 2/3/4G
multimode cellular applications. Using advanced switch
technologies, the ASM maintains low insertion loss and high
isolation on both transmit, transmit-receive and receive switching
paths. Additionally, the switch was designed to meet or exceed
system requirements for 2nd and 3rd harmonics into an antenna
mismatch up to 5:1, while delivering linearity (excellent triple
beat ratio), and second and third order (IP2, IP3) intermodulation
distortion performance to provide manufacturers with sufficient
margin in the certification process.
- The SKY14152 is a low-cost,
single-pole eight-throw (SP8T) ASM for use in multimode embedded
data cards. The compact 3.2 x 3.2 mm device is designed for
universal mobile telecommunications system (UMTS), code division
multiple access (CDMA2000), enhanced data for GSM evolution (EDGE),
and GSM applications and supports flexibility with up to five 3/4G
TRx bands. The device consists of an SP8T switch, GSM transmit
signal low-pass harmonic filters, and a RX SAW filter.
- The SKY14153 is a low-cost,
single-pole four-throw (SP4T) switch designed for wideband code
division multiple access (WCDMA) and diversity switching
applications that demand high linearity and low-insertion loss. The
compact 2.0 x 2.0 mm switch is optimized for third generation
partnership project (3GPP) 3/4G bands from 0.70 to 2.7 gigahertz
(GHz).
- The SKY14155 is a low cost,
double-pole four-throw (DP4T) switch designed for broadband, 3/4G
band switching applications which demand low insertion loss, high
isolation, and high linearity. The compact 2.0 x 2.0 mm switch is
manufactured using a state-of-the-art SOI process, and is optimized
for 3G WCDMA mode/band switching applications.
- The SKY18106 is a SP8T ASM
designed for multimode, high power switching applications that
demand low harmonics and insertion loss. The 3.2 x 4 mm switch is
optimized for both 2G GSM/EDGE and 3G WCDMA applications and
supports up to six 3/4G TRx ports with very low insertion loss,
high isolation and excellent linearity under antenna mismatch
conditions.
The newly introduced switch, ASM and FEM devices rely on
state-of-the-art pseudomorphic high electron mobility transistor
(pHEMT), SOI, integrated passive device (IPD), and wafer-level
chip-scale package (WL-CSP) SAW technologies. No external blocking
capacitors are required on any of the RF ports for all of these
devices – thus minimizing customers’ bill of materials and occupied
board space.
Pricing and Availability
Samples of the SKY14152, SKY14153, SKY14155 and SKY18106 are
currently available. The SKY13362 will be sampling in the second
quarter of 2010. For customized pricing, please contact
sales@skyworksinc.com.
Skyworks at Mobile World Congress
Skyworks will be showcasing its product portfolio in Hall 8,
Stand C132 at Mobile World Congress being held February 15-18.
About Skyworks
Skyworks Solutions, Inc. is an innovator of high reliability
analog and mixed signal semiconductors. Leveraging core
technologies, Skyworks offers diverse standard and custom linear
products supporting automotive, broadband, cellular infrastructure,
energy management, industrial, medical, military and mobile handset
applications. The Company’s portfolio includes amplifiers,
attenuators, detectors, diodes, directional couplers, front-end
modules, hybrids, infrastructure RF subsystems,
mixers/demodulators, phase shifters, PLLs/synthesizers/VCOs, power
dividers/combiners, receivers, switches and technical ceramics.
Headquartered in Woburn, Mass., Skyworks is worldwide with
engineering, manufacturing, sales and service facilities throughout
Asia, Europe and North America. For more information, please visit
Skyworks’ Web site at: www.skyworksinc.com.
Safe Harbor Statement
This news release includes "forward-looking statements" intended
to qualify for the safe harbor from liability established by the
Private Securities Litigation Reform Act of 1995. These
forward-looking statements include without limitation information
relating to future results and expectations of Skyworks (including
without limitation certain projections and business trends).
Forward-looking statements can often be identified by words such as
"anticipates," "expects," "forecasts," "intends," "believes,"
"plans," "may," "will," or "continue," and similar expressions and
variations or negatives of these words. All such statements are
subject to certain risks, uncertainties and other important factors
that could cause actual results to differ materially and adversely
from those projected, and may affect our future operating results,
financial position and cash flows.
These risks, uncertainties and other important factors include,
but are not limited to: uncertainty regarding global economic and
financial market conditions; the susceptibility of the wireless
semiconductor industry and the markets addressed by our, and our
customers', products to economic downturns; the timing,
rescheduling or cancellation of significant customer orders and our
ability, as well as the ability of our customers, to manage
inventory; losses or curtailments of purchases or payments from key
customers, or the timing of customer inventory adjustments; changes
in laws, regulations and/or policies in the United States that
could adversely affect financial markets and our ability to raise
capital; our ability to develop, manufacture and market innovative
products in a highly price competitive and rapidly changing
technological environment; economic, social and political
conditions in the countries in which we, our customers or our
suppliers operate, including security and health risks, possible
disruptions in transportation networks and fluctuations in foreign
currency exchange rates; fluctuations in our manufacturing yields
due to our complex and specialized manufacturing processes; delays
or disruptions in production due to equipment maintenance, repairs
and/or upgrades; our reliance on several key customers for a large
percentage of our sales; fluctuations in the manufacturing yields
of our third party semiconductor foundries and other problems or
delays in the fabrication, assembly, testing or delivery of our
products; the availability and pricing of third party semiconductor
foundry, assembly and test capacity and raw materials; our ability
to timely and accurately predict market requirements and evolving
industry standards, and to identify opportunities in new markets;
uncertainties of litigation, including potential disputes over
intellectual property infringement and rights, as well as payments
related to the licensing and/or sale of such rights; our ability to
rapidly develop new products and avoid product obsolescence; our
ability to retain, recruit and hire key executives, technical
personnel and other employees in the positions and numbers, with
the experience and capabilities, and at the compensation levels
needed to implement our business and product plans; lengthy product
development cycles that impact the timing of new product
introductions; unfavorable changes in product mix; the quality of
our products and any remediation costs; shorter than expected
product life cycles; problems or delays that we may face in
shifting our products to smaller geometry process technologies and
in achieving higher levels of design integration; and our ability
to continue to grow and maintain an intellectual property portfolio
and obtain needed licenses from third parties, as well as other
risks and uncertainties, including but not limited to those
detailed from time to time in our filings with the Securities and
Exchange Commission.
These forward-looking statements are made only as of the date
hereof, and we undertake no obligation to update or revise the
forward-looking statements, whether as a result of new information,
future events or otherwise.
Note to Editors: Skyworks and Skyworks Solutions are trademarks
or registered trademarks of Skyworks Solutions, Inc. or its
subsidiaries in the United States and in other countries. All other
brands and names listed are trademarks of their respective
companies.
Photos/Multimedia Gallery Available:
http://www.businesswire.com/cgi-bin/mmg.cgi?eid=6178729&lang=en.
Skyworks Solutions (NASDAQ:SWKS)
Gráfico Histórico do Ativo
De Jun 2024 até Jul 2024
Skyworks Solutions (NASDAQ:SWKS)
Gráfico Histórico do Ativo
De Jul 2023 até Jul 2024
