Skyworks Solutions, Inc. (NASDAQ:SWKS), an innovator of high
reliability analog and mixed signal semiconductors enabling a broad
range of end markets, today introduced a new family of antenna
switch modules (ASMs) for dual and triple-mode smart phones,
tablets and datacards. These newest devices cover a wide range of
applications from low-cost 3G handsets to HSPA+/LTE-enabled
datacentric devices such as high-end smart phones, data dongles and
tablets - - - all of which require design flexibility, high
performance and cost-effective architectures. Skyworks’
comprehensive RF switch products are based on both gallium arsenide
(GaAs) and silicon-on-insulator (SOI) technologies and complement
its world-class front-end and power amplifier module portfolio,
allowing the company to capture additional dollar content per
platform.
“Skyworks is excited to be augmenting our broad GaAs and silicon
based RF front-end solutions portfolio with these new SOI devices
that help address real market needs and enhance performance
requirements,” said Gregory L. Waters, executive vice president and
general manager of front-end solutions at Skyworks. “Our ability to
meet customers’ needs on multiple fronts and with highly integrated
architectures, demonstrates the breadth and depth of Skyworks’
technology and capabilities in this demanding market.”
About Skyworks’ Newest Antenna Switch Modules
The SKY13402-466LF is a GaAs pseudomorphic high electron
mobility transistor (pHEMT) single-pole, ten-throw (SP10T) antenna
switch with an integrated mobility industry processor interface
(MIPI) decoder and dual low-pass harmonic filters. The switch has
six transmit (Tx)/receive (Rx) ports that make it ideal for any
combination of 2G/3G multimode cellular applications. Using
advanced switching technologies, the device maintains low insertion
loss and high isolation for both Tx and Rx switching paths. The
switch also exhibits an excellent triple beat ratio and 2nd/3rd
order modulation distortion performance.
The SKY18108 is a single-pole, nine-throw (SP9T) antenna switch
front-end module packaged in a compact 3.2 x 2.5 millimeter (mm),
20-pin multi-chip module (MCM). The low-cost switch has three high
linearity ports suitable for transparent bridging (tri-band
3G/quad-band 2G or TD-SCDMA/2G multi-mode handsets and datacards).
The device is based on SOI technology and includes Tx harmonic
filters. It is designed for dual mode, high power switching
applications that require low insertion loss. The ASM is also
optimized for both GSM/EDGE/WCDMA and TD-SCDMA systems.
The SKY18110 is a single-pole, eight-throw (SP8T) ASM packaged
in a compact 3.2 x 3.2 mm, 20-pin MCM for use in multi mode, high
power band switching applications that demand low-insertion loss.
The ASM has six high linearity ports providing full flexibility for
2G GSM/EDGE, 3G and LTE handsets and datacards. It is based on SOI
technology and includes Tx harmonic filters.
The SKY18116 is a SP8T antenna ASM packaged in a compact 3.2 x
2.5 mm, 18-pin MCM designed for dual and tri mode, high power band
switching applications that require low-insertion loss. The ASM has
six high linearity ports providing full flexibility for 2G, 3G and
LTE handsets and datacards. It is based on SOI technology and
includes Tx harmonic filters and is optimized for GSM/EDGE, WCDMA
and LTE systems.
The SKY18118 is a SP10T switch FEM packaged in a compact 3.5 x
3.2 mm, 20-pin MCM. The FEM has five high linearity ports providing
full flexibility for 2G, 3G and LTE handsets and datacards. It is
based on SOI technology and includes Tx harmonic filters as well as
2G Rx surface acoustic wave (SAW) filters and is optimized for
compact layout and highly integrated RF front end customer
solutions.
Pricing and Availability
Samples of Skyworks’ new ASMs are currently available and will
commence volume production in the second half of 2011. For pricing
please contact sales@skyworksinc.com.
Skyworks at Mobile World Congress
Skyworks will be showcasing its product portfolio in Hall 8,
Stand C132 at Mobile World Congress being held February 14-17.
About Skyworks
Skyworks Solutions, Inc. is an innovator of high reliability
analog and mixed signal semiconductors. Leveraging core
technologies, Skyworks offers diverse standard and custom linear
products supporting automotive, broadband, cellular infrastructure,
energy management, industrial, medical, military and mobile handset
applications. The Company’s portfolio includes amplifiers,
attenuators, detectors, diodes, directional couplers, front-end
modules, hybrids, infrastructure RF subsystems,
mixers/demodulators, phase shifters, PLLs/synthesizers/VCOs, power
dividers/combiners, receivers, switches and technical ceramics.
Headquartered in Woburn, Mass., Skyworks is worldwide with
engineering, manufacturing, sales and service facilities throughout
Asia, Europe and North America. For more information, please visit
Skyworks’ Web site at: www.skyworksinc.com.
Safe Harbor Statement
This news release includes "forward-looking statements" intended
to qualify for the safe harbor from liability established by the
Private Securities Litigation Reform Act of 1995. These
forward-looking statements include without limitation information
relating to future results and expectations of Skyworks (including
without limitation certain projections and business trends).
Forward-looking statements can often be identified by words such as
"anticipates," "expects," "forecasts," "intends," "believes,"
"plans," "may," "will," or "continue," and similar expressions and
variations or negatives of these words. All such statements are
subject to certain risks, uncertainties and other important factors
that could cause actual results to differ materially and adversely
from those projected, and may affect our future operating results,
financial position and cash flows.
These risks, uncertainties and other important factors include,
but are not limited to: uncertainty regarding global economic and
financial market conditions; the susceptibility of the wireless
semiconductor industry and the markets addressed by our, and our
customers', products to economic downturns; the timing,
rescheduling or cancellation of significant customer orders and our
ability, as well as the ability of our customers, to manage
inventory; losses or curtailments of purchases or payments from key
customers, or the timing of customer inventory adjustments; changes
in laws, regulations and/or policies in the United States that
could adversely affect financial markets and our ability to raise
capital; our ability to develop, manufacture and market innovative
products in a highly price competitive and rapidly changing
technological environment; economic, social and political
conditions in the countries in which we, our customers or our
suppliers operate, including security and health risks, possible
disruptions in transportation networks and fluctuations in foreign
currency exchange rates; fluctuations in our manufacturing yields
due to our complex and specialized manufacturing processes; delays
or disruptions in production due to equipment maintenance, repairs
and/or upgrades; our reliance on several key customers for a large
percentage of our sales; fluctuations in the manufacturing yields
of our third party semiconductor foundries and other problems or
delays in the fabrication, assembly, testing or delivery of our
products; the availability and pricing of third party semiconductor
foundry, assembly and test capacity and raw materials; our ability
to timely and accurately predict market requirements and evolving
industry standards, and to identify opportunities in new markets;
uncertainties of litigation, including potential disputes over
intellectual property infringement and rights, as well as payments
related to the licensing and/or sale of such rights; our ability to
rapidly develop new products and avoid product obsolescence; our
ability to retain, recruit and hire key executives, technical
personnel and other employees in the positions and numbers, with
the experience and capabilities, and at the compensation levels
needed to implement our business and product plans; lengthy product
development cycles that impact the timing of new product
introductions; unfavorable changes in product mix; the quality of
our products and any remediation costs; shorter than expected
product life cycles; problems or delays that we may face in
shifting our products to smaller geometry process technologies and
in achieving higher levels of design integration; and our ability
to continue to grow and maintain an intellectual property portfolio
and obtain needed licenses from third parties, as well as other
risks and uncertainties, including but not limited to those
detailed from time to time in our filings with the Securities and
Exchange Commission.
These forward-looking statements are made only as of the date
hereof, and we undertake no obligation to update or revise the
forward-looking statements, whether as a result of new information,
future events or otherwise.
Note to Editors: Skyworks and Skyworks Solutions are trademarks
or registered trademarks of Skyworks Solutions, Inc. or its
subsidiaries in the United States and in other countries. All other
brands and names listed are trademarks of their respective
companies.
Skyworks Solutions (NASDAQ:SWKS)
Gráfico Histórico do Ativo
De Jun 2024 até Jul 2024
Skyworks Solutions (NASDAQ:SWKS)
Gráfico Histórico do Ativo
De Jul 2023 até Jul 2024
