Cluff Gold plc: Significant Drilling Results from the Yaoure Project
20 Junho 2012 - 10:30AM
Marketwired Canada
Cluff Gold ("Cluff Gold" or the "Company") (AIM:CLF)(TSX:CFG), the dual
AIM/TSX-listed West African focused gold mining company, is pleased to announce
significant sulphide drilling results from its Yaoure Project in Cote d'Ivoire.
Highlights
-- Discovery of new near-surface gold mineralisation between the current
Cluff Gold pit to the west and the previously operated Compagnie Miniere
d'Afrique ("CMA") pits to the east.
-- This discovery indicates that there is gold mineralisation for an
across-strike distance of 650m from west of the current Yaoure Central
pit to east of the CMA North pit.
-- The number of diamond drill rigs on site is being increased from three
to four, in order to rapidly test the upside potential, stepping out
along the entire 1.9km length of the pit area as well as testing for
parallel ore bodies.
-- Results provide further confidence that existing sulphide resources can
be significantly increased during 2012.
-- Metallurgical testing of two composite samples of sulphide ore returned
positive results, with high gold recoveries of up to 97%. Importantly
testing has also confirmed that the ore is non-refractory.
-- Significant diamond core drilling results in this new zone of shallow
mineralisation, include:
-- 26.50m at 1.53 g/t Au from 28.50m in hole YDD0031
-- 22.06m at 2.54 g/t Au from 31.44m in hole YDD0033
-- 18.40m at 1.45 g/t Au from 24.67m in hole YDD0039
-- 10.13m at 7.15 g/t Au from 57.77m in hole YDD0048
-- Significant intercepts in holes targeting the down-dip extension to the
east of known mineralisation in the pit include:
-- 4.93m at 21.82 g/t Au from 170.4m in hole YDD0036
-- 2.28m at 20.49 g/t Au from 34.34m in hole YDD0037
-- 20.25m at 3.55 g/t Au from 186.97m in hole YDD0041
-- 6.10m at 3.62 g/t from 200.10m and 2.00m at 24.14 g/t Au from
227.84m in hole YDD0045
-- 26.07m at 2.23 g/t from 188.64m and 5.65m at 4.41 g/t Au from
222.41m in hole YDD0047
Peter Spivey, Chief Executive of Cluff Gold, commented:
"These results reinforce our continued confidence in the Yaoure gold project.
The location of the project, situated close to existing infrastructure, means
that the cost base for development is much lower than other projects located in
West Africa. Yaoure is fast becoming a major component in delivering our stated
strategy for becoming a mid-tier gold producer."
Yaoure gold deposit
Yaoure is a typical mesothermal, quartz-carbonate vein-style gold deposit hosted
by Early Proterozoic (Birimian) basaltic metavolcanics and granodiorite
intrusions, at lower greenschist facies metamorphic grade. Ore in the two
moderately east-dipping main shear zones is significantly enhanced by an array
of structurally-controlled, auriferous quartz veins(1).
The Yaoure Central pit covers only a third of a substantial +200ppb gold in soil
anomaly stretching over 3.0km within the Mount Yaoure exploitation permit. In
addition to the three diamond drill rigs currently focusing on Yaoure Central,
the Company is continuing exploration along a separate NW-trending 2.2km long
soil anomaly, from Angovia 2 to Kongonza, with one RAB drilling rig and one RC
drilling rig. The current measured and indicated resources for the Kongonza
prospect total 78,000 oz(1). An upgrade of this resource is planned for Q3 based
on an additional 5000m of RC drilling and 1100m of diamond core drilling (6
holes).
The favourable infrastructure in the area including access via sealed roads from
Abidjan to within a few kilometres of the mine, easy access to water, and most
importantly, cheap hydro-electric power from the nearby Kossou barrage, make
Yaoure an ideal third operation in the Cluff Gold portfolio. It provides the
opportunity to establish the Company as a mid-tier producer from the development
of its existing assets.
Drilling strategy
The drilling results announced today focus on the sulphide potential of Yaoure
Central, where the current sulphide measured and indicated resources total
292,000 ounces (5.6Mt at 1.6g/t)(2). This mineral resource estimate is based on
previous RC drilling typically extending down to about 100m below the original
surface (60m below the current pit floor).
The first phase of diamond drilling at Yaoure Central totalled 1,967m over 23
drill holes collared within the existing Yaoure Central pit: 13 holes testing
steep NNE (N50-70E) structures of which 11 results were previously reported; and
10 holes testing the main north-south trending structures, dipping at 30 degrees
to the east, of which 2 results were previously reported. These two previously
announced results on the north-south trending structures confirmed the width and
grade of the main mineralised zone (the Main Zone) reported from historic RC
results (30m at 3.64g/t), the aggregate composite results being 28.37m at 3.24
g/t from 35.30m in YDD0021 and 31.60m at 1.57 g/t from 36.80m in YDD0014. These
results are updated in Appendix 1 to include Metallic Screen Fire Assays. The
remaining results for the 10 holes from phase 1 are reported today in Appendix
2.
Subsequently, an additional 23 holes totalling 6,442m were drilled in phase 2,
mainly testing the continuity of the north-south trending structures, which dip
to the east at between 25 and 45 degrees, over a 900m strike length and up to
340m across strike. The second phase of holes were all drilled to the west from
the east of the current pit, with a typical spacing of 100m and stepping back
between about 100m and 340m. The results from 18 of the 23 phase 2 holes are
reported in Appendix 3; results have not yet been received for the remaining 5
holes (holes YDD00040, 43, 46, 49 and 51).
A 20 hole, 8000m programme (Phase 3), mainly on a 200m grid spacing, was
recently started with the objective of outlining the extent of the open-pittable
sulphide resources in the Yaoure Central area, over an area of 1.9 km in a N-S
direction by up to 0.9 km in an E-W direction. This will also encompass the
Compagnie Miniere d'Afrique (CMA) pits to the east. CMA reportedly extracted
some 1.9 million tonnes (Mt) of oxide ore from 1999 to 2003 with a mean plant
feed grade of 3.9 g/t from a series of three open pits which extended to a
maximum depth of 40m below surface. The first four deep holes of the phase 3
programme, totalling 2043m and testing underneath the CMA pits, have been
completed and assays are awaited.
A map showing the location of the Yaoure project and the various prospects
thereon, together with a drilling map and section, is set out on the Company's
website at www.cluffgold.com.
Results
The highlight of the Phase 2 results is the discovery of significant new
near-surface mineralisation in the 200-250m gap between the Cluff Gold pit to
the west and the CMA North pit to the east. Hence mineralisation extends over a
width on surface of at least 650m in an east-west direction.
New near-surface mineralisation in the gap has been discovered in holes 30, 31,
33, 39 and 48. Significant composite intersections, including aggregated
composite intersections without internal dilution restrictions where considered
appropriate, are:
----------------------------------------------------------------------------
YDD0030 8.50m at 2.47 g/t Au from 12.50m
----------------------------------------------------------------------------
11.35m at 1.86 g/t Au from 35.00m
----------------------------------------------------------------------------
YDD0031 13.50m at 0.76 g/t Au from 0.00m
----------------------------------------------------------------------------
8.50m at 3.11 g/t Au from 28.50m
----------------------------------------------------------------------------
14.00m at 0.94 g/t Au from 41.00m
----------------------------------------------------------------------------
(aggregate: 26.50m at 1.53 g/t Au from 28.50m)
----------------------------------------------------------------------------
YDD0033 4.76m at 1.18 g/t Au from 31.44m
----------------------------------------------------------------------------
10.80m at 4.61 g/t Au from 42.70m
----------------------------------------------------------------------------
(aggregate: 22.06m at 2.54 g/t Au from 31.44m)
----------------------------------------------------------------------------
YDD0039 8.80m at 2.49 g/t Au from 24.67m
----------------------------------------------------------------------------
7.07m at 0.54 g/t Au from 36.00m
----------------------------------------------------------------------------
(aggregate: 18.40m at 1.40 g/t Au from 24.67m)
----------------------------------------------------------------------------
YDD0048 10.13m at 7.15 g/t Au from 57.77m
----------------------------------------------------------------------------
Significant intercepts in holes targeting known mineralisation in the pit at
depth to the east include:
----------------------------------------------------------------------------
YDD0030 5.82m at 3.19 g/t Au from 213.89m
----------------------------------------------------------------------------
YDD0033 8.21m at 1.09 g/t Au from 87.60m
----------------------------------------------------------------------------
6.54m at 3.61 g/t Au from 99.74m
----------------------------------------------------------------------------
(aggregate: 18.68m at 1.76 g/t Au from 87.60m)
----------------------------------------------------------------------------
YDD0036 4.93m at 21.82 g/t Au from 170.4m
----------------------------------------------------------------------------
YDD0037 2.28m at 20.49 g/t Au from 34.34m
----------------------------------------------------------------------------
YDD0041 20.25m at 3.55 g/t Au from 186.97m
----------------------------------------------------------------------------
YDD0045 6.10m at 3.62 g/t Au from 200.10m
----------------------------------------------------------------------------
2.00m at 24.14 g/t Au from 227.84m
----------------------------------------------------------------------------
YDD0047 26.07m at 2.23 g/t Au from 188.64m
----------------------------------------------------------------------------
5.65m at 4.41 g/t Au from 222.41m
----------------------------------------------------------------------------
Logging of oriented core indicates that mineralisation occurs in an array of
veins and structures - with a wide range of attitudes in addition to the two
trends expected (structures striking N-S and dipping at moderate (25-45) degrees
to the east and steep structures striking N50-70E). A detailed structural
interpretation is in progress to obtain a better understanding of the
mineralisation and to assist the Company in optimising its drill programme.
Hole YDD0035, collared at the north end of the current pit, is important in that
it discovered mineralisation at depth to the west of the pit, including: 10.99m
at 0.91 g/t Au from 197.13m. Further drilling will test this new extension to
the north.
The other results reported here are for the remaining first phase holes drilled
from within the Yaoure Central North pit and include two holes (YDD0012 and
YDD0013) on the E-W structures and eight holes (YDD0022 to YDD0029) on the main
N-S structure.
This drilling confirms the presence of gold in multiple intersections in both
the E-W and N-S structures. Of significance is the intersection of a Lower Zone
in hole YDD0022: an aggregate intersection of 36.68m at 1.32 g/t Au from 99.41m.
Results for the main N-S structure indicate a more complex structure, both
down-dip and along strike, than previously indicated.
Metallurgy
Metallurgical testing has been carried out on two composite samples from holes
YDD0014 and 21, considered to be representative of mineralisation seen to date.
The sulphide ore leached easily with high gold recoveries (95-97%) and without
high reagent consumptions. Physical characteristics are for the most part also
attractive in terms of milling power requirement. The fact that there is a
significant gravity-recoverable portion will serve to further enhance processing
parameters.
Outlook
These results continue to confirm the potential for a large sulphide deposit
underlying the oxide deposits at Yaoure. The Company has therefore recently
decided to increase the number of diamond drill rigs on site to from three to
four, in order to more rapidly test the upside potential, stepping out along the
entire 1.9km strike length of the target area as well as testing up to 0.9 km
across strike for parallel ore bodies. A further 19,000m of diamond core
drilling is budgeted for the remainder of 2012 utilising up to four diamond
drill rigs. The strategy is to define an inferred resource during 2012 which can
be upgraded to measured and indicated through subsequent in-fill drilling.
An airborne magnetic survey has recently been completed covering the Company's
entire 367 square kilometre exploration and exploitation permits. This, in
conjunction with a remote sensing imagery interpretation, will be used to help
define exploration targets outside of the presently identified area of
geochemical anomalies and ensure that the entire permit areas are appropriately
explored.
About Cluff Gold
Cluff Gold is a gold developer-producer with assets in West Africa. The Company
generates significant cash flow through its Kalsaka gold mine in Burkina Faso,
where the production profile has been enhanced by the recent acquisition of the
neighbouring Sega project. The Company remains focused on its objective of
becoming a mid-tier producer through the development of its wholly-owned
Baomahun project in Sierra Leone, which is expected to contribute an additional
135,000oz of gold per annum, with significant exploration potential along
strike. In addition, the Company is also exploring the significant sulphide
potential at its Yaoure project in Cote d'Ivoire. With its experience of
bringing new mines into production and a project pipeline spanning Burkina Faso,
Cote d'Ivoire and Mali, the Company aims to further increase its production
profile with its highly prospective exploration work across all assets. For more
information, please visit www.cluffgold.com.
This report includes certain "forward-looking information" within the meaning of
applicable Canadian securities legislation.
All statements other than statements of historical fact included in this report,
including, without limitation, the positioning of the Company for future
success, statements regarding exploration, drilling results, resource
calculations and potential future production at Yaoure, and future capital plans
and objectives of Cluff Gold, are forward-looking information that involve
various risks and uncertainties. There can be no assurance that such statements
will prove to be accurate and actual results and future events could differ
materially from those anticipated in such statements. Important factors that
could cause actual results to differ materially from Cluff Gold's expectations
include, among others, the Company's ability to delineate sufficient sulphide
resources for the development of a CIL/CIP operation, risks related to
international operations, the actual results of current exploration and drilling
activities, changes in project parameters as plans continue to be refined as
well as future price of gold. Although Cluff Gold has attempted to identify
important factors that could cause actual results to differ materially, there
may be other factors that cause results not to be as anticipated, estimated or
intended. There can be no assurance that such statements will prove to be
accurate as actual results and future events could differ materially from those
anticipated in such statements. Accordingly, readers should not place undue
reliance on forward-looking statements. Cluff Gold does not undertake to update
any forward-looking statements that are included herein, except in accordance
with applicable securities laws.
The diamond drilling programme at Yaoure was undertaken by an independent
drilling contractor. Drill cores for assaying were taken at a maximum of two
metre intervals and were cut with a diamond saw with one-half of the core placed
in sealed bags and sent to the SGS sample preparation facility in Yamoussoukro,
Cote d'Ivoire. The core samples were then crushed down to minus 2 mm, split with
half the sample then being pulverised down to 85% passing 75 microns. About 200g
of the pulverised sample was then shipped to the SGS Laboratory in Tarkwa, in
Ghana, an independent laboratory to the Company, where the samples were analysed
for gold by fire assay using a 50 g sample. Two holes were analysed at Intertek
Minerals Ltd in Accra, Ghana, using the same sample protocol. As part of the
Company's QA/QC procedures, internationally recognised standards, duplicates and
blanks were inserted and check assays were submitted to Intertek in Ghana.
Peter Brown is a "Qualified Person" within the definition of National Instrument
43-101 and has verified the data disclosed in this release, including sampling,
analytical and test data underlying the information contained herein, and
reviewed and approved the information contained within this announcement. Mr
Brown (MIMMM) is the Group Exploration Manager.
References
(1) Detailed geology, descriptions of Yaoure Central (previously Prospect
4) and other exploration prospects at Angovia, and other exploration
information can be found in the Company's NI43-101 report Technical
Review of Angovia Gold Mine, Mount Yaoure, Cote d'Ivoire, as prepared
by SRK Consulting, dated October 2008 and available on SEDAR. Resource
estimation has been subsequently updated for production and exploration
changes in Cluff Gold's 2010 Annual Report.
(2) Encompassed within the 169,000oz (3.4Mt at 1.6g/t) in measured
resources and 123,000oz (2.2Mt at 1.7g/t) in indicated resources set
out in the Company's 2010 Annual Report.
Appendix 1: Phase 1 Results (previously released but now updated with Metallic
Screen Fire Assay where available)
----------------------------------------------------------------------------
From To Interval Gold
Hole ID (m) (m) (1)(m) (g/t)
----------------------------------------------------------------------------
YDD0001 7 9 2 4.98
24.2 28 3.8 0.99
48.7 62.9 14.2 1.87
YDD0002 27 30 3 2.62
43 46 3 1.3
48.35 53 4.65 0.72
76 83 7 1.01
YDD0003 25.78 29.15 3.37 0.75
32.05 35.15 3.1 4.93 (4)
42 45.55 3.55 97.6 (4)
55.45 76.5 21.05 2.62 (4)
YDD0004 2.9 5.7 2.8 13.33 (4)
27.22 44.52 17.3 2.28 (4)
50.06 53 2.94 0.81
55.39 57.84 2.45 0.91
65.3 68 2.7 0.56
70.05 74.62 4.57 0.99
YDD0005 0 5 5 0.65
13 27.28 14.28 1.67 (4)
YDD0006 4 7 3 0.83
YDD0007 10 11 1 4.81 (3)
YDD0008 5.93 12.3 6.37 0.57
15.98 18.7 2.72 0.9
31.9 45.15 13.25 9.22 (4)
YDD0009 49.3 50.63 1.33 1.6 (3)
YDD0010 25.78 27.85 2.07 0.53
37.75 43.4 5.65 1.76
46 48 2 1.68
62.74 73.15 10.41 1.89 (4)
YDD0011 38.39 42.1 3.71 1.36
45.7 50.42 4.72 1.11 (4)
53.1 56.06 2.96 0.67
60.62 62.94 2.32 0.77
YDD0014 36.8 68.4 31.6 1.57 (2), (4)
including 36.8 41.45 4.65 2.48
and 43.75 49.41 5.66 2.73
or 52.8 57.95 5.15 2.33 (4)
and 63 68.4 5.4 0.88
73.35 75.44 2.09 1.02
YDD0021 35.3 63.67 28.37 3.24 (2), (4)
including 35.3 40.7 5.4 1.93
and 45.73 58.15 12.42 1.96
and 60.63 63.67 3.04 19.03 (4)
87.03 89.75 2.72 1
97.7 104.18 6.48 0.61
122 124.21 2.21 0.43
----------------------------------------------------------------------------
UTM UTM Elevation
Hole ID East North UTM RL Azimuth Dip
----------------------------------------------------------------------------
YDD0001 220648 777342 214 180 -60
YDD0002 220648 777375 215 180 -60
YDD0003 220662 777359 215 180 -55
YDD0004 220661 777406 211 360 -60
YDD0005 220641 777426 208 360 -50
YDD0006 220641 777438 208 360 -50
YDD0007 220638 777503 206 360 -50
YDD0008 220686 777361 212 180 -55
YDD0009 220711 777361 212 180 -55
YDD0010 220691 777415 209 360 -60
YDD0011 220736 777443 202 360 -60
YDD0014 220787 777411 202 270 -60
including
and
or
and
YDD0021 220796 777487 194 270 -60
including
and
and
1) Interval lengths are not true widths. Composite intersections are based
on a minimum width of 2m and a cut-off of 0.4 g/t gold. Internal
dilution of up to 2.00m at less than 0.4 g/t has been allowed for
continuity.
2) Aggregated composite intersections for YDD014 and YDD021. Internal
dilution of greater than 2.00m at less than 0.4 g/t has been allowed -
5.05m for YDD0014-Main and 5.03 m for YDD0021-Main.
3) No intersection greater than 2m. Significant intersection in hole
shown.
4) Intersection includes a Metallic Screen Fire Assay. All samples with
visible gold or returning greater than 10 g/t are reassayed by 500g
Metallic Screen Fire Assay (MSFA). Where a MSFA is available, this has
been used in the calculation of the intersection rather than the
original 50g Fire Assay, regardless of whether the MSFA is higher or
lower than the original 50g Fire Assay.
Appendix 2: Remaining Phase 1 Results which have previously not been released
----------------------------------------------------------------------------
From To Interval Gold
Hole ID (m) (m) (1)(m) (g/t)
----------------------------------------------------------------------------
YDD0012 1.5 20 18.5 0.64
27.35 31.93 4.58 1.31
35.87 42.4 6.53 1.32
44.6 49.8 5.2 0.84
53.56 57.55 3.99 0.85
61.35 65.55 4.2 2.7
YDD0013 1.5 5 3.5 0.66
13.65 20.39 6.74 2.65
25.74 31.12 5.38 0.57
35.71 42.76 7.05 1.14
YDD0022 39.57 44.87 5.3 1.86
99.41 136.09 36.68 1.32 (2), (4)
including 99.41 109.1 9.69 2.66
and 116.73 119.08 2.35 2.32
and 122.63 126.25 3.62 2.15 (4)
and 131.97 136.09 4.12 1.85
YDD0023 54.16 58.18 4.02 1.51
70.35 76.69 6.34 1.18
107.06 109.63 2.57 0.48
120.04 122.46 2.42 1.46
YDD0024 4.72 11.28 6.56 2.23
YDD0025 8.9 11.24 2.34 2.6
YDD0026 46.18 50.04 3.86 0.81
64.46 71.28 6.82 0.73
81.22 90.27 9.05 0.67
98.73 106.43 7.7 0.63
YDD0027 28.85 40.78 11.93 1.22
61.66 63.76 2.1 1.5
115.84 123.97 8.13 1.06
YDD0028 7.5 10.35 2.85 2.06
43.43 47.74 4.31 1.47
98.73 101.15 2.42 1.33
YDD0029 0 6.5 6.5 0.81
24.71 26.81 2.1 1.15
62.93 66.65 3.72 2.21
----------------------------------------------------------------------------
UTM UTM Elevation
Hole ID East North UTM RL Azimuth Dip
----------------------------------------------------------------------------
YDD0012 220710 777439 204 360 -60
YDD0013 220710 777519 200 360 -60
YDD0022 20894 7325 195 270 -60
including
and
and
and
YDD0023 20892 7248 198 270 -60
YDD0024 20825 7349 196 270 -60
YDD0025 20823 7425 194 270 -60
YDD0026 20820 7450 199 270 -60
YDD0027 20895 7275 194 270 -60
YDD0028 20832 7400 194 270 -60
YDD0029 20840 7374 194 270 -60
1) Interval lengths are not true widths. Composite intersections are based
on a minimum width of 2m and a cut-off of 0.4 g/t gold. Internal
dilution of up to 2.00m at less than 0.4 g/t has been allowed for
continuity.
2) Aggregated composite intersection for YDD0022. Internal dilution of
7.63m has been allowed.
4) Intersection includes a Metallic Screen Fire Assay. All samples with
visible gold or returning greater than 10 g/t are reassayed by 500g
Metallic Screen Fire Assay (MSFA). Where a MSFA is available, this has
been used in the calculation of the intersection rather than the
original 50g Fire Assay, regardless of whether the MSFA is higher or
lower than the original 50g Fire Assay.
Appendix 3: Phase 2 Results
As at 11 June, assays were outstanding for 5 holes - YDD0040, 43, 46, 49 and 51.
It is not anticipated that results from these outstanding 10 holes (2 testing
the E-W structures and 8 testing the N-S structure) will differ significantly
from those announced herein.
----------------------------------------------------------------------------
From To Interval Gold
Hole ID (m) (m) (1)(m) (g/t)
----------------------------------------------------------------------------
YDD0030 12.5 21 8.5 2.47 (4)
35 46.35 11.35 1.86
66.35 68.35 2 0.63
100.51 107.46 6.95 0.65
127.94 137 9.06 1.3
150.74 153.78 3.04 0.65
213.89 219.71 5.82 3.19 (4)
YDD0031 0 13.5 13.5 0.76
28.5 55 26.5 1.53 (2)
including 28.5 37 8.5 3.11
and 41 55 14 0.94
68.92 71.92 3 1.68
116.38 118.67 2.29 0.59
121.62 126.42 4.8 1.1
176.12 180.18 4.06 0.43
YDD0032 2 5 3 0.5
47.66 51.67 4.01 1.9
77.01 79.56 2.55 0.64
82.76 86.27 3.51 0.7
232.63 236.64 4.01 0.6
YDD0033 4.2 6.2 2 0.77
31.44 53.5 22.06 2.54 (2), (4)
including 31.44 36.2 4.76 1.18
and 42.7 53.5 10.8 4.61 (4)
87.6 106.28 18.68 1.76 (2)
including 87.6 95.81 8.21 1.09
and 99.74 106.28 6.54 3.61
115.74 118.76 3.02 0.43
120.54 122.56 2.02 6.33 (4)
132.41 161 28.59 0.77 (2)
including 132.41 135.75 3.34 0.55
and 141.33 145.92 4.59 2.36
and 148.1 151.4 3.3 0.74
and 155.08 161 5.92 0.89
167.34 172.17 4.83 0.81
179.65 183.63 3.98 0.46
203.62 211.16 7.54 0.84
YDD0034 85.32 87.39 2.07 0.65
108.63 112.8 4.17 2.9
142.81 146.99 4.18 0.73
181 184.45 3.45 2.22
YDD0035 171.36 174.38 3.02 0.87
186.74 188.75 2.01 2
191.46 194.29 2.83 1.79
197.13 208.12 10.99 0.91
214.78 217.36 2.58 0.63
232.69 236.2 3.51 1.32
YDD0036 100.58 103.19 2.61 3.18
105.9 108.59 2.69 4.14
123.29 126.22 2.93 0.82
170.4 175.33 4.93 21.82
YDD0037 34.34 37.62 2.28 20.49
78.77 83.02 4.25 1.28
155.3 158.75 3.45 1.19
162.15 166.7 4.55 0.82
194.23 196.23 2 1.49
YDD0038 40.87 43.59 2.72 3.79
85.75 87.76 2.01 3.98
224.01 226.21 2.2 0.98
252.09 255.19 3.1 2.26
YDD039 24.67 43.07 18.4 1.45 (2)
including 24.67 33.47 8.8 2.49
and 36 43.07 7.07 0.54
70.92 73.37 2.45 0.83
75.71 77.71 2 0.73
87.86 90.56 2.7 0.4
92.61 95.41 2.8 1.38
99.03 102.18 3.15 0.54
177.23 183.32 6.09 1.42
233.52 236.85 3.33 2.53
239.55 241.59 2.04 1.77
283.66 285.68 2.02 0.53
296.24 298.3 2.06 0.42
YDD0041 16.7 24.55 7.85 0.69
33.55 40.3 6.75 1.64
126.13 130.13 4 1.13
157.77 166.69 8.92 1.24
180.77 182.97 2.2 0.49
186.97 207.22 20.25 3.55 (4)
228.32 230.34 2.02 0.4
236.99 242.06 5.07 3.18
245.35 253 7.65 2.13
312.23 316.23 4 0.49
YDD0042 84.99 87.61 2.62 0.91
281.75 285.86 4.11 0.5
YDD0044 3.5 9.1 5.6 0.86
22.66 26.66 4 1.04
37.45 40.45 3 13.3
111.11 116.76 5.65 2.47
136.37 139.99 3.62 2.39
143.55 151.64 8.09 1.84
YDD0045 132.86 138.58 5.72 2.78
154.7 157.67 2.97 4.03 (4)
159.81 164.77 4.96 0.96
172.22 179.96 7.74 0.46
191.8 195.7 3.9 3.15
200.1 206.2 6.1 3.62 (4)
227.84 229.84 2 24.14 (4)
248.05 252.31 4.26 1.29
YDD0047 12.1 16.1 4 0.97
143.04 146.62 3.58 2.42
166.93 146.62 2.05 1.91
172.86 174.86 2 0.78
177.66 180.71 3.05 0.77
188.64 214.71 26.07 2.23
222.41 228.06 5.65 4.41
232.56 234.56 2 0.60
260.9 263.43 2.53 0.90
266.9 270.51 3.61 0.55
YDD0048 57.77 67.9 10.13 7.15
82.47 85.53 3.06 0.88
91.15 94.09 2.94 1.61
96.67 99.64 2.97 0.58
147.19 155.53 8.34 1
203.85 208.16 4.31 1.01
283.44 288.99 5.55 0.81
298.73 301.73 3 0.4
305.16 308.16 3 2.9
337.29 342.24 4.95 1.86
YDD0050 13.5 18.57 5.07 1.21
103.45 107.42 3.97 3.82 (4)
140.07 142.08 2.01 0.77
173.94 176.04 2.1 1.32
183 186.99 3.99 0.5
YDD0052 33.45 35.54 2.09 2.87
----------------------------------------------------------------------------
UTM UTM Elevation
Hole ID East North UTM RL Azimuth Dip
----------------------------------------------------------------------------
YDD0030 21015 7300 239 270 -60
YDD0031 21015 7400 237 270 -60
including
and
YDD0032 220926 777386 241 270 -60
YDD0033 21127 7300 245 270 -60
including
and
including
and
including
and
and
and
YDD0034 220860 777686 235 270 -60
YDD0035 220759 777785 229 270 -60
YDD0036 220885 777284 223 270 -60
YDD0037 220932 777186 220 270 -60
YDD0038 220906 777086 225 270 -60
YDD039
including 221037 777587 242 270 -60
and
YDD0041 221038 777286 250 270 -60
YDD0042 221038 777187 253 270 -60
YDD0044 220987 777486 242 270 -60
YDD0045 220926 777336 242 270 -60
YDD0047 221025 777687 238 270 -60
YDD0048 221087 777587 242 270 -60
YDD0050 220989 776987 249 270 -60
YDD0052 220802 777434 198 90 -85
1) Interval lengths are not true widths. Composite intersections are based
on a minimum width of 2m and a cut-off of 0.4 g/t gold. Internal
dilution of up to 2.00m at less than 0.4 g/t has been allowed for
continuity.
2) Aggregated composite intersections for YDD0032 and YDD0039. Internal
dilution of greater than 2.00m at less than 0.4 g/t has been allowed -
4.00m in YDD0031, 6.50m, 3.93m and 5.58m respectively in YDD0033 and
2.53m in YDD0039.
4) All samples with visible gold or returning greater than 10 g/t are
being reassayed by 500g Metallic Screen Fire Assay (MSFA). Where a MSFA
is available, this has been used in the calculation of the intersection
rather than the original 50g Fire Assay, regardless of whether the MSFA
is higher or lower than the original 50g Fire Assay.
Cream Minerals Ltd. (TSXV:CMA)
Gráfico Histórico do Ativo
De Jun 2024 até Jul 2024
Cream Minerals Ltd. (TSXV:CMA)
Gráfico Histórico do Ativo
De Jul 2023 até Jul 2024
