CENTENNIAL, Colo., Dec. 14, 2021 /PRNewswire/ -- NioCorp
Developments Ltd. ("NioCorp" or the "Company")
(TSX: NB; OTCQX: NIOBF) is pleased to announce the results
of assaying completed on drill core samples from the Elk Creek
Project (the "Project") that were obtained through an agreement
with the University of Nebraska's
Conservation and Survey Division ("CSD").
A total of 1,094 samples originating from 18 diamond drill holes
completed by previous operators of the Project were obtained
pursuant to an agreement between the Company and CSD and were
assayed for rare earth element content at Actlabs in Ancaster, Ontario. The assay results
were subjected to a Quality Assurance and Quality Control program
consistent with industry best practices.
These new assay results complement the analysis previously
completed by the Company of the geological and metallurgical
evaluation of all of the rare earth data associated with the
Project (see this announcement).
With the completion of this recent assay work, the rare earth
assay database is considered complete for the purposes of
calculating the potential rare earth content within the footprint
of the previously announced niobium, scandium, and titanium Mineral
Resource at the Elk Creek Project. If NioCorp is able to
complete an update to its existing Mineral Resource and add
information on rare earth content data, that update is expected to
provide the average content (ore grade as expressed in
parts-per-million, or PPM) and total contained tonnage of each
individual rare earth element in the Mineral Resource.
In addition to the work now being conducted by independent
geologic consultants on a potential updated Mineral Resource with
rare earth data added, NioCorp is aggressively pursuing a technical
work plan that includes metallurgical testing, mineral resource and
reserve calculations, and additional market studies focused on rare
earths.
Mark Smith, CEO and Executive
Chairman of NioCorp, said: "I am extremely pleased with the
completion of this important step towards the development of a rare
earth component to the mineral resource and reserve for the Elk
Creek Project. If our rare earth content is found to be rich
enough to economically justify extraction of individual rare earths
as a byproduct of our planned niobium, scandium, and titanium
production, the Elk Creek Project could ultimately emerge as a U.S.
producer of the magnetic rare earths, assuming adequate project
funding is secured."
"In fact, our polymetallic deposit contains an array of some of
the most important critical metals that are required by electrified
transportation and other climate-friendly technologies," Mr. Smith
added. "This includes heavy magnetic rare earths such as
dysprosium and terbium, which are currently produced in
commercially significant quantities only in Asia. Some
sources of heavy rare earths, such as the nation of Myanmar, are considered to have a high
political risk from the perspective of supply chain security.
The more critical minerals we produce in the U.S., the better
positioned we will be to rapidly ramp up production of many
climate-friendly technologies with Made in USA minerals."
The tables below outlines intervals of interest in particular
drill holes.
Table 1: Drill Hole Assay
Results
|
Azimuth
|
Dip
|
From
|
To
|
Length
|
La2O3
|
Ce2O3
|
Pr6O11
|
Nd2O3
|
Sm2O3
|
Eu2O3
|
Gd2O3
|
Drillhole
|
(degrees)
|
(degrees
|
(feet)
|
(feet)
|
(feet)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
EC-011
|
300
|
-60
|
695
|
785
|
90
|
1,639
|
2,894
|
322
|
1,109
|
157.4
|
40.8
|
90.6
|
|
|
|
1,295
|
1,530
|
235
|
1,259
|
1,985
|
205
|
678
|
112.4
|
31.3
|
69.7
|
EC-015
|
120
|
-60
|
1,590
|
1,810
|
220
|
904
|
1,407
|
149
|
493
|
79.4
|
22.3
|
54.5
|
|
|
|
2,360
|
2,755
|
395
|
680
|
1,187
|
132
|
454
|
70.6
|
19.0
|
45.2
|
EC-018
|
0
|
-90
|
610
|
1,517
|
907
|
500
|
941
|
108
|
394
|
66.7
|
17.3
|
39.2
|
EC-019
|
0
|
-90
|
1,890
|
2,160
|
270
|
1,301
|
2,523
|
286
|
1,015
|
150.0
|
40.3
|
87.1
|
EC-020
|
0
|
-90
|
1,110
|
1,360
|
250
|
536
|
924
|
99
|
347
|
58.6
|
17.0
|
39.4
|
EC-021
|
300
|
-60
|
1,740
|
2,000
|
260
|
1,629
|
2,664
|
283
|
933
|
149.7
|
41.5
|
94.2
|
EC-024
|
0
|
-90
|
760
|
870
|
110
|
560
|
1,046
|
125
|
469
|
89.6
|
24.7
|
60.2
|
EC-027
|
0
|
-90
|
660
|
793
|
133
|
1,141
|
1,889
|
190
|
656
|
91.5
|
23.8
|
59.8
|
EC-030
|
0
|
-90
|
2,280
|
2,430
|
150
|
1,147
|
1,957
|
210
|
704
|
119.8
|
36.6
|
89.8
|
|
|
Azimuth
|
Dip
|
From
|
To
|
Length
|
Tb2O3
|
Dy2O3
|
Ho2O3
|
Er2O3
|
Tm2O3
|
Yb2O3
|
Lu2O3
|
Drillhole
|
(degrees)
|
(degrees
|
(feet)
|
(feet)
|
(feet)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
(ppm)
|
EC-011
|
300
|
-60
|
695
|
785
|
90
|
10.1
|
42.9
|
6.2
|
14.0
|
1.7
|
9.2
|
1.3
|
|
|
|
1,295
|
1,530
|
235
|
7.6
|
33.2
|
5.1
|
12.0
|
1.5
|
8.8
|
1.3
|
EC-015
|
120
|
-60
|
1,590
|
1,810
|
220
|
6.3
|
27.5
|
4.0
|
8.9
|
1.1
|
6.1
|
0.9
|
|
|
|
2,360
|
2,755
|
395
|
5.7
|
27.3
|
4.1
|
9.0
|
1.1
|
5.8
|
0.8
|
EC-018
|
0
|
-90
|
610
|
1,517
|
907
|
4.6
|
22.2
|
3.6
|
8.4
|
1.0
|
5.9
|
0.9
|
EC-019
|
0
|
-90
|
1,890
|
2,160
|
270
|
9.7
|
42.4
|
6.1
|
13.0
|
1.5
|
7.9
|
1.1
|
EC-020
|
0
|
-90
|
1,110
|
1,360
|
250
|
4.5
|
20.3
|
3.0
|
6.8
|
0.8
|
4.8
|
0.7
|
EC-021
|
300
|
-60
|
1,740
|
2,000
|
260
|
11.8
|
55.4
|
8.6
|
19.8
|
2.4
|
12.9
|
1.8
|
EC-024
|
0
|
-90
|
760
|
870
|
110
|
7.9
|
39.0
|
6.3
|
15.0
|
1.8
|
10.3
|
1.5
|
EC-027
|
0
|
-90
|
660
|
793
|
133
|
6.9
|
32.1
|
5.2
|
13.4
|
1.7
|
10.1
|
1.5
|
EC-030
|
0
|
-90
|
2,280
|
2,430
|
150
|
11.4
|
54.3
|
8.5
|
19.3
|
2.2
|
12.4
|
1.7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Table 2: Drill Hole Assay Results of
Light, Heavy, Total, and Magnetic REEs
|
Azimuth
|
Dip
|
From
|
To
|
Length
|
LREO1
|
HREO2
|
TREO3
|
Percent
|
Drillhole
|
(degrees)
|
(degrees
|
(feet)
|
(feet)
|
(feet)
|
(ppm)
|
(ppm)
|
(ppm)
|
Magnetics4
|
EC-011
|
300
|
-60
|
695
|
785
|
90
|
5,964
|
374
|
6,338
|
23.4%
|
|
|
|
1,295
|
1,530
|
235
|
4,127
|
283
|
4,410
|
20.9%
|
EC-015
|
120
|
-60
|
1,590
|
1,810
|
220
|
2,953
|
211
|
3,164
|
21.4%
|
|
|
|
2,360
|
2,755
|
395
|
2,453
|
189
|
2,642
|
23.4%
|
EC-018
|
0
|
-90
|
610
|
1,517
|
907
|
1,943
|
170
|
2,113
|
25.0%
|
EC-019
|
0
|
-90
|
1,890
|
2,160
|
270
|
5,126
|
359
|
5,485
|
24.7%
|
EC-020
|
0
|
-90
|
1,110
|
1,360
|
250
|
1,907
|
156
|
2,063
|
22.8%
|
EC-021
|
300
|
-60
|
1,740
|
2,000
|
260
|
5,509
|
398
|
5,907
|
21.7%
|
EC-024
|
0
|
-90
|
760
|
870
|
110
|
2,199
|
256
|
2,455
|
26.1%
|
EC-027
|
0
|
-90
|
660
|
793
|
133
|
3,876
|
246
|
4,122
|
21.5%
|
EC-030
|
0
|
-90
|
2,280
|
2,430
|
150
|
4,018
|
356
|
4,374
|
22.4%
|
|
1
LREO is the sum of the following: La2O3, Ce2O3, Pr6O11,
Nd2O3.
|
2
HREO is the sum of the following: Sm2O3, Eu2O3, Gd2O3,
Tb2O3, Dy2O3, Ho2O3, Er2O3, Tm2O3, Yb2O3, Lu2O3.
|
3
TREO is the sum of the following: La2O3, Ce2O3, Pr6O11,
Nd2O3, Sm2O3, Eu2O3, Gd2O3, Tb2O3, Dy2O3, Ho2O3, Er2O3, Tm2O3,
Yb2O3, Lu2O3.
|
4
Percent Magnetics is calculated as the sum of LPr6O11, Nd2O3,
Tb2O3, Dy2O3 divided by the calculated TREO. The measured
length of each individual assay interval was used to calculate a
weighted average for the noted intervals.
|
The Company's focus continues to be on the four "magnetic" rare
earths: neodymium, praseodymium, terbium, and
dysprosium. The table above indicates that a substantial
portion of the rare earths present in this dataset are comprised of
the magnetic rare earths ("Percent Magnetics"). These
elements are the critical ingredients in rare earth permanent
magnets, which are the strongest permanent magnets commercially
available. Rare earth magnets are key to the decarbonization
of the world's economy, as they are indispensable in the production
of electric cars, wind turbines, and high-efficiency electric
motors. Publicly available average indicative pricing for the
magnetic rare earths from metal.com as of December 3, 2021, appears below:
Rare Earth Oxide
Product
|
Metal.com
Indicative Average Price, 12/3/21
(USD/kg)
|
Neodymium
Oxide
|
$128
|
Praseodymium
Oxide
|
$130
|
Terbium
Oxide
|
$1,665
|
Dysprosium
Oxide
|
$439
|
The assay intervals noted do not constitute a Mineral Resource
or a Mineral Reserve under any regulatory definition. Each
drill hole is within the footprint of the 7,800-acre Elk Creek
Carbonatite as well as being within the footprint of the existing
niobium, scandium, and titanium mineral resource. Each drill
hole noted above is located on land that the Company currently owns
or is subject to an exclusive Option to Purchase agreement with the
local landowner. The mineral resource is depicted on the map
below using a 0.3% Nb2O5 grade shell, along
with the drill holes noted in the table above.
Scott Honan, NioCorp's COO,
said: "NioCorp is extremely grateful to the staff and
leadership of CSR, without which we would not have been able to
complete this important step forward towards realizing the rare
earth potential of the Elk Creek Project."
The University of Nebraska's UNL's
Conservation and Survey Division ("CSD"), is a unique,
multi-disciplinary research, service and data-resource organization
that originated in 1893. As Nebraska's geological survey, its
mission is to investigate and record information about the state's
geologic history, its rock and mineral resources, the quantity and
quality of its water resources, land cover, and other aspects of
its geography, as well as the nature, distribution and uses of its
soils. CSD was actively involved in the discovery of the
Elk Creek carbonatite more than
five decades ago. CSD continues to curate samples and data
from the deposit, among its many other collections, for the benefit
of stakeholders and in the public interest. CSD has been an
invaluable source of data and expertise for minerals development
and other Earth-science issues in Nebraska since its founding.
The information contained in this press release does not change
any of the mineral resource or mineral reserve estimates contained
in NioCorp's April 16, 2019, NI
43-101 Technical Report, Feasibility Study, Elk Creek Superalloy
Materials Project, Nebraska. The
information contained in this press release is provided to inform
the reader of the growth of our geologic understanding of the rare
earth potential of the Project. There has been insufficient work to
define a mineral resource with respect to rare earth data and it is
uncertain if further work will result in rare earth data being
delineated as a mineral resource.
A Quality Assurance / Quality Control protocol following
industry best practices was incorporated into the program and
included systematic insertion of certified reference materials into
sample batches at a rate of 7.4%. A total of 1,181 samples,
including 87 QAQC samples, were submitted to Activation
Laboratories (Actlabs) in Ancaster,
ON for assay. Collected samples targeted original pulverized
splits generated during historical sampling program. If
pulverized samples could not be located coarse crush samples were
used, resulting in 1047 original pulverized splits and 47 original
coarse-splits being submitted for analysis. Samples were selected
and extracted from a locked storage core and prepared sample
repository, under the supervision of a qualified person and the
curator in charge of the repository.
The lab analysis package included eight-major oxides, rare
earths, and trace elements. Samples were analyzed via fusion
inductively coupled plasma (ICP) and inductively coupled
plasma-mass spectrometry (ICP-MS) in addition to niobium by XRF,
using packages 8-REE and 8-Nb2O5 – XRF. Samples were received,
weighed and prepared by crushing to 80% passing 10 mesh (for
coarse-splits), followed by a 250 g riffle split and pulverizing to
95% passing 105 µ (package RX1).
Qualified Person:
Brad Ulry, P.Geo., Chief
Operating Officer, Dahrouge Geological Consulting Ltd., a qualified
person as defined in National Instrument 43-101, has reviewed and
approved the technical information contained in this news release
and verified the data disclosed in this news release.
@NioCorp $NB.to $NIOBF #Niobium #Scandium #rareearth #ElkCreek
#NdFeB #rareearthmagnets #magnets #EV #electricvehicle
For More Information:
Contact Jim Sims, VP of External
Affairs, NioCorp Developments Ltd., 303-503-6203,
jim.sims@niocorp.com
About NioCorp
NioCorp is developing a superalloy materials project in
Southeast Nebraska that will
produce Niobium, Scandium, and Titanium. The Company also is
evaluating the potential to produce several rare earth byproducts
from the Project. Niobium is used to produce superalloys as
well as High Strength, Low Alloy ("HSLA") steel, which is a
lighter, stronger steel used in automotive, structural, and
pipeline applications. Scandium is a superalloy material that can
be combined with Aluminum to make alloys with increased strength
and improved corrosion resistance. Scandium is also a critical
component of advanced solid oxide fuel cells. Titanium is used in
various superalloys and is a key component of pigments used in
paper, paint and plastics and is also used for aerospace
applications, armor, and medical implants. Magnetic rare
earths, such as Neodymium, Praseodymium, Terbium, and Dysprosium
are critical to the making of Neodymium-Iron-Boron ("NdFeB")
magnets, which are used across a wide variety of defense and
civilian applications.
Cautionary Note Regarding Forward-Looking Statements
Certain statements contained in this document may constitute
forward-looking statements, including statements regarding the
Company's ability to produce Niobium, Scandium, Titanium and rare
earths products at the Elk Creek Superalloy Materials Project and
the Company's belief that it may be able to emerge as a significant
U.S. producer of magnetic rare earths. Forward-looking statements
are based on estimates and assumptions made by the Company in light
of its experience and its perception of historical trends, current
conditions and expected future developments, as well as other
factors that the Company believes are appropriate in the
circumstances. Readers are cautioned that such forward-looking
statements involve known and unknown risks, uncertainties and other
factors that may cause a change in such forward-looking statements
and the actual outcomes and estimates to be materially different
from those estimated or anticipated future results, achievements or
position expressed or implied by those forward-looking statements.
Risks, uncertainties and other factors that could cause NioCorp's
plans or prospects to change include risks related to the Company's
ability to operate as a going concern; risks related to the
Company's requirement of significant additional capital; changes in
demand for and price of commodities (such as fuel and electricity)
and currencies; changes in economic valuations of the Project, such
as Net Present Value calculations, changes or disruptions in the
securities markets; legislative, political or economic
developments; the need to obtain permits and comply with laws and
regulations and other regulatory requirements; the possibility that
actual results of work may differ from projections/expectations or
may not realize the perceived potential of NioCorp's projects;
risks of accidents, equipment breakdowns and labor disputes or
other unanticipated difficulties or interruptions; the possibility
of cost overruns or unanticipated expenses in development programs;
operating or technical difficulties in connection with exploration,
mining or development activities; the speculative nature of mineral
exploration and development, including the risks of diminishing
quantities of grades of reserves and resources; and the risks
involved in the exploration, development and mining business and
the risks set forth in the Company's filings with Canadian
securities regulators at www.sedar.com and the SEC at www.sec.gov.
NioCorp disclaims any intention or obligation to update or revise
any forward-looking statements whether as a result of new
information, future events or otherwise.
View original content to download
multimedia:https://www.prnewswire.com/news-releases/niocorp-reports-rare-earth-assay-results-301444603.html
SOURCE NioCorp Developments Ltd.